It's a perfekt daily driver!

The new Camaro subframe made the truck drive like car!

I want a 502CBB for it or a Hemi 426 or a.....

Back to my Chevy...

Looks FAT!

This is my 54 Barndoor that's next in line...

Thinking Dove blue and lowerd on Fuchs + 4" engine with IDAs...

Here is a RLR transplate that a friend sold to me.

He went with a Mendiola and a new custom made transplate for it.

Back to the Ghia.

Here is my CMS spindelmount front wheels.

I'm going to try having disc mounted to them and a sett Willwood calipters. Hope this will work, if not I'l buy a sett ERCO 0"offset front wheel and wide 5 discbrakes from CBperformance or a sett Weld Racing Magnum wheels or......

Looks crazy and I like it!

New rearaxel and 18,5"x31" x15" Sportsman on 15"x14" Centerline Convo wheels. Looks realy meaty!

Yes I like the Prostreet look.

Heres the engine in and it looks like the ride is going to be perfekt! Now the rear needs a make over.

Here is the oily 265" Chevy v8 going in, no it didn't fit the engine mounts on the Camaro subframe.

6 hours later I pusched it out to se it 12" lower!!! And with no engine in it! I was thinking, SHIT it's going to hit the floor when the eingen is in!

The Ghia is not the only car that I'm going crazy with. Here is me 56 Chevy truck that I cut the frame of and welded a Camaro subframe in to.

Nice!!!
TURBO!
Here is som spy pics...

I mounted the steeringbox and I't looks very ugly. Need a steering rack for it.

Here it's mounted to the chassis.

Here it is after 2 hours cutting and drilling. 4" narrowed and adjusters fitted.

Needs som tig welding for the adjusters, then it's ready to be fitted on the chassis.

It's realy nice working with new and clean parts, love it!

Why I'm using a beam with out towers is that I don't like the "bending" the shocks do to the aluminum beam. The shocks will be mounted to the chassis.

Took it apart to make it narrow, 4" is ok I think.

Here is the front beam I'm going to use.

It is a aluminum front beam without towers.

Yes, there is the sexy body of a 57 lowlight Ghia.

It's a nice summerday in Sweden.

Here it is, my chassis from mr Ron Lummus.

It's a 1010 chassis: Type 1 Ghia, for king & linkpin front end.

Start your engines!

This pic that I found on the net made me want one to!

It's a racecar with a lowlight ghia 56-59 body (sexy).

So what's the best thing to do if not to build one!

When a friend orderd a drag chassis from Ron Lummus Racing in Ca USA for his Notchback (VW 1500s) I didn't sleep well for a long time, I wanted one to!

Well, I have a 57 Ghia to start with and YES I orderd a chassis from mr Ron Lummus.